Safety Data Sheet- Fineline Accessory Paint.
6. ACCIDENTAL RELEASE MEASURES: ISSUE DATE 23-10-2025 Page 2
Emergency procedures: Increase ventilation. If possible contain the spill. Wear appropriate personal protective equiptment and clothing to prevent exposure.
Spillage can be slippery. Place inert absorbent material onto spillage. Collect the material and place into a suitable labelled container. if contamination of sewers or waterways occurs, inform the local water and waste management authorities, in accordance with local regulations. Dispose of waste according to the applicable and national regulations.
7. HANDLING AND STORAGE:
Precautions for Safe Handling: Use only in a well ventillated area. Keep containers tightly closed. Prevent the buildup of dusts, mists or vapours in the work atmospere. Maintain high standards of personal hygiene. ie. washing hands prior to eating, drinking, smoking or using toilet facilities.
Conditions for safe storage, including any incompatibilities: Protect from freezing. Store in a cool, dry, well ventillated area, out of direct sunlight.
Store in suitable labeled containers. Ensure that storage conditions comply with applicable local and national regulations.
8. EXPOSURE CONTROL/PERSONAL PROTECTION:
Occupational exposure limit values: Not available.
Biological Limit Values : No biological limits allowed.
Appropriate Engineering Controls: Use with good general ventilation. If mists of vapours are produced, local exhaust ventilation should be used.
Respiratory Protection: If engineering controls are not effective in controlling airbourne exposure, then an approved respirator with a replaceable vapour/mist filter should be used. Reference should be made to Australia/New Zealand Standards AS/NZS 1715, Selection, Use and Maintenance of Respiratory Devices, in order to make any necessary changes for individual circumstances.
Eye Protection: Safety glasses with side shields, chemical goggles, or full face shield as appropriate should be used. Final choice of appropriate eye/face protection will vary according to individual circumstances. Eye protection devices should conform to relevant regulations.
Eye protection should conform with Australian/ New Zealand Standard AS/NZS 1337- Eye Protectors for Industrial Applications.
Hand protection: Wear gloves of impervious material. Final choice of appropriate gloves will vary according to individual circumstances, ie. methods of handling, of according to the risk assessments undertaken. Occupational protective gloves, should conform to relevant regulations.
Reference should be made to AS/NZS 2161.1: Occupational protective gloves-Selection, Use and maintenance.
Body Protection: Suitable protective workwear, eg. cotton overalls buttoned at neck and wrist is recommended.
Chemical resistant apron is recommended where large quantities are handled.