Fineline Accessory Paint Information
Product Identifier:
Paint origin code:
Intended use:
Directions for use:
Caution note:
Direct Supplier:
Information Source:
This Label is on every Product.
Ctc. Colour: Karaka; Ironsand; Titania; etc. Qty. 15Mls.
Accessory paint for colour matching fasteners with pre-painted products.
SHAKE WELL! Use with brush provided above 10 degrees C.
Colours may appear lighter when wet and will match when cured.
Merchant: or Roll-Former- manufacturer: or Roof cladding contractor.
Product Info: https://www.finelinedistributors.co.nz: Packed on - Date.
Click on Image
for Product Overview
Fineline paint applicator bottles, are filled with 100% Acrylic Roof Paint, that is manufactured in New Zealand, for use in NZ environments.
The bulk paint is manufactured by Coating Technologies Ltd. Auckland NZ. Product Code 22-2305 Legacy Roof Satin.
Fineline Paint end use specification:
Over 60 colours are available in popular formulations,
to match pre-painted metal products, that are used in roof
& wall cladding, rainwater goods and garage doors etc.
The intended use is for direct application to small areas:
For example: fastenings such as rivet heads & screw heads,
to match surrounding pre-painted material.
It is not intended for repair of damaged cladding.
Note: Light damage to pre-painted sheets, is best left alone.
Fineline Paint Application: By small brush contained in screw cap.
SHAKE WELL! To mix paint pigment prior to paint application.
Use sparingly: as differential performance may occur over time.
Make sure that the product to be painted is rust free, clean & dry.
To avoid (dew point) condensation, on metal cladding, the substrate
temperature should not be less that 10 degrees C.
Allow up to 6 Hrs. for natural air curing of the Acrylic paint.
If due point occurs after application , and prior to the paint drying, then moisture can affect the paint cure process.